Slackline Tree Protection – Save the Trees from Abrasion
Trees are the most popular anchors when it comes to slackline setup. Slacklining is not only fun but also has many benefits. However, while it’s okay to have a great slackline experience, do not forget to care for the trees.
Slackline tree protection doesn’t have to be a complicated affair. Various rules and regulations apply when slacklining. There are various aspects of the tree that you have to consider just before you settle on a given tree as your slackline anchor.
Choosing Slackline Trees and Under-slings Tree Protection
- Slackline Tree Size (Diameter) - Check that the anchor point is at least 30cm girth. Higher tensions call for larger diameters. Besides, ensure that the tree looks healthy as well as strong.
- Type of tree barks- a tree with thick barks is the best for slacklining. Be sure to remove the line when you’re not using it.
- Slings- Make sure the slings at least 5cm wide and spread them behind tree such to increase the surface area.
- Tree Protection under the Tree Slings. We discuss this factor under two methods below
Slackline Tree Protection Techniques;
As hinted above, you have to make sure that the tree can withstand the tension from the slackline, So you have to focus on the slackline tree size. You also have to make sure that you spread your slings as concentrating the at the same point means exerting too much pressure on the tree.
Our focus now in slackline tree protection is between the wrapping sling and the bark of the tree. That will come in handy in preventing or minimizing the friction between the slings and the barks or the tree itself.
Slackline Tree Protection DIY
This method of protecting the barks of the slackline trees from abrasion is the easiest do. It requires only locally available materials, and you're ready to go. Get some old towels, a piece of carpet and foam. Camping mat and pieces of clothing will also do just fine.
Now there is a slight problem which fortunately has a solution. You’ll discover that the materials cannot hold on the tree by themselves. But with spring clamp, you can hold them in place before you tie the line.
If you don’t want to devise your own slackline tree protection equipment, then you can opt to go with a pre-made tree wrap. It comes handy in protecting the trees as well as the sling. What’s more, it helps to keep the tree slings from moving as you balance, walk and do all manner of slackline tricks on the webbing.
Slackline Tree Protection Benefits
The most basic advantage that comes with protecting your slacklining is to prevent damage to the tree. Vigorous tension and friction wear out the bark of the tree. What results is a wound exposing the tree to infections, dangerous insects, and other hazards. The worst case scenario would be the tree dying.
As pointed out, without a wrap around the tree, you’ll be shortening the lifespan of your best slackline. Sharp barks of the tree will cut into your nylon slackline slowly by slowly, and it will eventually break. You can imagine the danger that would expose to you.
The best way to avoid depending on trees is setting up a slackline without trees. That way, you can enjoy slacklining in your backyard on the beach and the heavy snow. You’ll also learn how to setup a slackline without trees.
In as much as you want to experience the thrill that comes with slacklining, slackline tree protection should be a priority. Be a part of those who are intent on promoting a responsible sport.